RV-220 transducer kit on 24.5 degree deadrise
|
04-18-17, 03:06 PM
Post: #1
|
|||
|
|||
RV-220 transducer kit on 24.5 degree deadrise
Good afternoon,
According the info I can find, the new RV-220 transducer pack can be fitted to a 13-20 degree deadrise. My Contender 31T has a 24.5 degree deadrise. Will the RV-220 pack work or am I forced to get the transom mount RV transducer? Thanks in advance for any help, Lynn |
|||
04-19-17, 10:11 AM
(This post was last modified: 04-19-17 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: RV-220 transducer kit on 24.5 degree deadrise
Welcome to the Raymarine Forum Lynn,
Installing the specified transducer set on a hull having deadrise greater than 20 degrees will create a blind spot under the hull. Unfortunately, Raymarine has not offered a RV thru-hull transducer for hulls having more than 20 degrees of deadrise, leaving only the transom mounted RV transducer option at this time. A feature request will be logged to consider introduction of RV thru-hull transducer from hulls having more than 20 degrees of deadrise. Please click here more information concerning product and feature suggestions. |
|||
04-20-17, 06:40 PM
Post: #3
|
|||
|
|||
RE: RV-220 transducer kit on 24.5 degree deadrise
Thank you very much Chuck, your wealth of knowledge is much appreciated!
|
|||
04-21-17, 07:28 AM
Post: #4
|
|||
|
|||
RE: RV-220 transducer kit on 24.5 degree deadrise
You're welcome.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)