Raymarine forum / Raymarine Forums / Multifunction Displays v / Engine control Unit

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Engine control Unit
05-16-17, 07:04 PM (This post was last modified: 05-17-17 10:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
MarcinZ Offline
Junior Member
**
 		Posts: 9
Joined: Feb 2016
Reputation: 0
Engine control Unit
Is Yanmar engine 4JH5 engine series is compatible with ECI and what is eventual part number for engine harenss.

Martin
Find all posts by this user
Quote this message in a reply
05-17-17, 12:03 PM (This post was last modified: 05-17-17 12:04 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Engine control Unit
Welcome to the Raymarine Forum Martin,

Per the ECI-100's Compatibility web page (excerpt below), the 4JH45 would be compatible with ECI-100 if the engine pre-installed with a NMEA 2000 system by the boat's manufacturer. Should you be uncertain of whether this so, then it would be recommended that the boat's manufacturer be contacted to obtain confirmation. Similarly, any information concerning the engine harness would need to be provided by Yanmar or the boat's manufacturer.

[Image: attachment.php?aid=985]


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication