Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dsm300 and bv744
06-03-17, 05:09 PM
Post: #1
Dsm300 and bv744
C80 unit will mark bottom but will not display fish. The dsm has green lights. Is there a way to test the transducer? I've reset the dsm, read the books several times. If i then up the gain I just get a bunch of clutter.

Help
Find all posts by this user
Quote this message in a reply
06-05-17, 10:56 AM
Post: #2
RE: Dsm300 and bv744
Welcome to the Raymarine Forum msf,

It is recommended that you verify that the Transducer setting within the Fishfinder application's settings be configured to match the model of transducer that is installed onboard. If so and should the problem persist, then it would be recommended that the Gain and Color Gain configuration settings be configured from Auto to Manual and then increased until fish are marked.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)