Raymarine forum / Raymarine Forums / Marine Weather / Satellite Radio v / SR100 question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SR100 question
07-11-17, 04:18 PM
Post: #1
Mick Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2016
Reputation: 0
SR100 question
Is there a way to confirm the integrity of the antenna, other than the indicator light on the SR100? i.e. Is there a way to see antenna signal strength? The SR100 is connected to a classic E80.
Find all posts by this user
Quote this message in a reply
07-19-17, 01:59 PM (This post was last modified: 07-19-17 02:01 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: SR100 question
Welcome to the Raymarine Forum Nick,

When viewing a Weather application page/pane, satellite signal strength (no signal, low, medium, high) is listed on the right side of the page's titlebar. Should the satellite signal strength field instead report No Connection, then it would indicated that Ethernet communications between the MFD and the SiriusXM Satellite Weather Receiver is not occurring.

[Image: attachment.php?aid=1170]


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication