Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 MFD compatibility with SmartPilot S1 and ST6001
07-21-17, 08:01 AM
Post: #1
E80 MFD compatibility with SmartPilot S1 and ST6001
I've got a SmartPilot S1 and ST6001 on SeaTalk with an E80 MFD. The MFD is getting Heading data from the pilot, but the MFD status box shows a coloured pilot wheel and an "X", and the pilot control menu item is not present on the E80. The pilot is operating normally. I am wondering if there is a compatibility problem between the pilot and MFD, or if a software update is needed on the pilot.

Is the E80 MFD with software App v5.69 and Boot code v1.03 compatible with a SmartPilot S1 course computer software v S1 463 and Controller ST6001 with software v15?

Thank you,
Don
Find all posts by this user
Quote this message in a reply
07-25-17, 08:31 AM
Post: #2
RE: E80 MFD compatibility with SmartPilot S1 and ST6001
Welcome to the Raymarine Forum Don,

Please click here to view a FAQ addressing this subject. Within E-Series Classic MFDs operating with v5.69 software, the command sequence MENU->SYSTEM SETUP->SYSTEM INTEGRATION->AUTOPILOT CONTROL is used to configure the Autopilot Control feature's state. The S1/S1G/S2/S2G/S3/S3G Autopilot Course Computers will support the MFD's Autopilot Control feature when items within the referenced FAQ have been satisfied.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)