AXIOM 9 NETWORKING

[Lazlukacs]

Chuck,

Thank you for the response. It's very helpful and clears up most of my confusion. I reviewed the linked "installing power curuits for marine electronics" post that you suggested both before I submitted my last post and after reading your latest response. That was/is a very helpful post. Thank you.

I have an additional set of questions regarding the Axiom 9 MFD's since I have two different types, as well as the other devices I plan to connect. Based on your power connection response and the way I interpret your guidance in your 10-06-2017 response to me, I have four questions:

1) I should connect the direct powered Axiom 9 RV MFD, with the RV-200 3D transducer and the 48" Open Array SHD Color Radar to the direct powered HS5 Network Switch and connect the direct powered HS5 Network Switch to the direct powered SeaTalkng 5-way Connector, correct?

2) I should connect the direct powered Axiom 9 MFD to the direct powered SeaTalkng 5-way Connector, correct?

3) I should connect the direct powered Ray60 VHS Radio to the direct powered SeaTalkng 5-way connector, correct?

4) I should connect the network powered RS150 GPS Antenna to the direct powered SeaTalkng 5-way connector, correct?

Thank you once again for the help.