European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[TG] Adding an EV1 Heading Sensor to Axiom?
|
|
01-08-18, 02:00 PM
(This post was last modified: 01-08-18 10:05 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[TG] Adding an EV1 Heading Sensor to Axiom?
I would like to have heading data on my NMEA 2000 network for the Axiom panel to use, the EV1 looks like the correct product but it is setup for a SeaTalkng network.
Is it easy/possible to connect the EV1 directly to the NMEA 2000 net without creating a separate SeaTalkng bus? Maybe an adapter cable between the EV1 and the NMEA T connector? Thanks in advance for the help. |
|||
|
|
01-08-18, 10:08 PM
Post: #2
|
|||
|
|||
|
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
Hello pinkish_panther,
No problem. The only difference between STNG and vanilla NMEA2000 is the connector/cabling type: an adaptor cable is all you need. Part A06075 (http://www.raymarine.com.au/view/?id=5536) should do what you need. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
|
01-09-18, 11:47 AM
Post: #3
|
|||
|
|||
|
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
Thanks for the quick answer and path to the correct cable!
|
|||
|
|
|
01-10-18, 09:38 AM
Post: #4
|
|||
|
|||
|
RE: [TG] Adding an EV1 Heading Sensor to Axiom?
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)