The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [TG] Adding an EV1 Heading Sensor to Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Adding an EV1 Heading Sensor to Axiom?
01-08-18, 02:00 PM (This post was last modified: 01-08-18 10:05 PM by Tom - Raymarine - Moderator.)
Post: #1
pinkish_panther Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2017
Reputation: 0
[TG] Adding an EV1 Heading Sensor to Axiom?
I would like to have heading data on my NMEA 2000 network for the Axiom panel to use, the EV1 looks like the correct product but it is setup for a SeaTalkng network.

Is it easy/possible to connect the EV1 directly to the NMEA 2000 net without creating a separate SeaTalkng bus? Maybe an adapter cable between the EV1 and the NMEA T connector?

Thanks in advance for the help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG] Adding an EV1 Heading Sensor to Axiom? - pinkish_panther - 01-08-18 02:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication