Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] a Series Splash Screen
02-06-18, 12:26 PM (This post was last modified: 02-06-18 04:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] a Series Splash Screen
I followed the instructions to load a 'splash screen' on to my 2 a Series units (a127 and a128) and didn't have any luck.

I resized the picture and downloaded the 2 files on a 16gb card. After attempting to load the new splash screen, it didn't work. And when I looked at the files on the card again, the 3 original files were on it in, but also looks like 3 more were put on by the machine. What am I doing wrong?

Any help is appreciated.
Find all posts by this user
Quote this message in a reply
02-06-18, 04:29 PM
Post: #2
RE: [CA] a Series Splash Screen
Welcome to the Raymarine Forum bpyoung,

Please click here to view a FAQ addressing this subject. Should you have followed the procedures specified within the referenced FAQ and should the problem persist, then please provide the PNG file along with the rayatom.upgrade.08.sh & rayatom.upgrade.08.sh.sig to a response to this post for further analysis. It is recommended that these three files be copied into a ZIP folder than that the ZIP folder be attached to your response.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-08-18, 02:32 PM (This post was last modified: 02-08-18 05:17 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] a Series Splash Screen
Thanks for the response. Attached are the files that I tried to load in to the unit.
Find all posts by this user
Quote this message in a reply
02-08-18, 05:24 PM
Post: #4
RE: [CA] a Series Splash Screen
bpyoung,

I suspect that you have not configured your Windows Explorer to show file extensions, as the name of the PNG file included within your zip folder was found to be "OEM_A12_splash.png (2).png" rather than "OEM_A12_splash.png". Accordingly, I suggested the change to your Windows Explorer configuration settings to show file extensions and then renaming the file to match that specified above.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-08-18, 05:31 PM (This post was last modified: 02-09-18 08:43 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA] a Series Splash Screen
Thanks....I'll give that a shot when I get back to the boat in a few weeks.
Find all posts by this user
Quote this message in a reply
02-09-18, 08:43 AM
Post: #6
RE: [CA] a Series Splash Screen
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)