Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
04-06-18, 06:55 AM (This post was last modified: 04-06-18 08:17 AM by Chuck - Raymarine - Moderator.)
Post: #13
Jeffg Offline
Junior Member
**
 		Posts: 16
Joined: Feb 2017
Reputation: 0
RE: [MG]Adding E120 to Seatalkng Netwrok?
Hi Mark,
Thank you. I was wondering about the Seatalk Return pin out. I will try that.
As far as the 12v power is concerned, can I just disconnect the E120 and connect the red wire to any 12v source? Or, will this affect other devices on the bus? My intent is to move the C80 to the bridge and have E120 at my lower helm.
Thanks,
Jeff
Thanks,
Jeff Gardiner
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [MG]Adding E120 to Seatalkng Netwrok? - Jeffg - 04-06-18 06:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication