Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] rmx 10 and axiom
02-26-18, 07:54 PM (This post was last modified: 02-27-18 11:10 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] rmx 10 and axiom
I have 2 Axioms rv 9 networked together. Do I need two rmk 10 or will one work both.
I think I'll need a HS5 switch. Thank you.
Find all posts by this user
Quote this message in a reply
02-27-18, 11:50 AM
Post: #2
RE: [CA] rmx 10 and axiom
Welcome to the Raymarine Forum boatman2,

Yes, a single RMK-9 or RMK-10 may be used to remotely control any Axiom / Axiom Pro MFDs within the system. You simply need to pair each MFD to the RMK-9 or RMK-10. As the Axiom MFDs feature only on Ethernet Network socket, a HS5 RayNet Network Switch will need to be installed within a system featuring two or more Axiom MFDs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)