The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [CA] Copying Waypoints from Voyager

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Copying Waypoints from Voyager
02-27-18, 10:39 AM (This post was last modified: 02-27-18 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #1
WindDancer Offline
Junior Member
**
 		Posts: 2
Joined: Dec 2017
Reputation: 0
[CA] Copying Waypoints from Voyager
Using Voyager Planner and creating over 100 waypoints I can't seem to be able to get the waypoints to copy to the C-95.
The C-95 has the latest software update and the SD card is the correct size, but during transfer a note pops up on the C-95 saying the card is in use.
I have attached the file hoping you could look at the DP3 from Voyage and the GPX file I am using to copy to see if their is a problem with the C-95 or is the waypoint information in violation such as waypoints names to long or something else.
Thanks WindDancer
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Copying Waypoints from Voyager - WindDancer - 02-27-18 10:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication