[CA11] upgrading to AxiomPro 9

[george123]

I will be replacing the SR100 with the new SR150. The SR100 used the old style Ethernet cable. I will need an adapter to connect the Ethernet cable to the new SR150 which uses the Raynet style. The old cable runs back to an old style network switch which I will not be replacing. I am assuming I will not need a crossover adapter.

The system has two e95 displays that I will be replacing with Atom Pro 9 S units. Do I have to set one as master and the other as slave like I did with the e95 setup? Does Raymarine recommend connect only one display to the STng (NMEA2000) network or do I connect each display.

Thanks