Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Compatibility with SPX
06-02-18, 02:47 PM (This post was last modified: 06-03-18 10:48 PM by Tom - Raymarine - Moderator.)
Post: #1
Compatibility with SPX
I'm looking to replace our 6 year old e7d as it is getting rather erratic. The problem I'm having is with compatibility with our SPX autopilot. The Es75 series lists compatibility with the Evolution pilot, but no mention of SPX. Will the Es75 drive an SPX? Will any other Raymarine chartplotters have this capability? Do any Axioms drive autopilots?
Find all posts by this user
Quote this message in a reply
06-03-18, 10:55 PM
Post: #2
RE: Compatibility with SPX
Hello cstotland,

eS and Axiom can both send waypoint/navigation data to Raymarine pilot of the last 20 years or so, through either SeatalkNG directly or through Seatalk1 if connected via one of our Seatalk1-SeatalkNG convertors (part number E22158.) eS displays run the same Lighthouse 2 software as an e7 and offer exactly the same interfacing.

Axiom displays offer a deeper level of pilot control when you have an Evolution pilot (full pilot control, with or without a dedicated pilot display) which isn't possible with an SPX, but SPX will steer fine to waypoint data from either eS or Axiom. You engage Track mode from the pilot display as normal.


Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)