[TG11] RL80C Plus system - all functions work but not at both MFDs

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] RL80C Plus system - all functions work but not at both MFDs

10-09-18, 05:18 AM (This post was last modified: 10-10-18 08:16 AM by Chuck - Raymarine - Moderator.)

Post: #3

Boblloyd Offline

Junior Member

Posts: 3
Joined: Sep 2018
Reputation: 0

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs

Thanks for the detailed reply Tom. I only see Raymarine splash screens. I'll check the HSB2 connections as you suggest. What's puzzling to me is how the Upper MFD receives graphical Sonar data and the Lower MFD receives graphical radar data. Does that prove the HSB2 interface in both are at least partially functional? -Bob

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-07-18, 01:50 PM

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Tom - Raymarine - Moderator - 10-07-18, 08:16 PM

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-09-18 05:18 AM

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Tom - Raymarine - Moderator - 10-12-18, 01:32 AM

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-13-18, 07:08 PM

RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Tom - Raymarine - Moderator - 10-15-18, 01:36 AM

User(s) browsing this thread: 1 Guest(s)