[CA] [CA11] Auto Pilot

[Laynes]

I´ll try to explain what is happening with my autopilot:
The autopilot is controlling the boat normally and suddenly the P70 begins to alarm and the screen becomes grey . At this time appears the message ¨ CURRENT LIMIT ".
It continues to alarm and a message ¨DRIVE STOPPED¨ appears.. At this time, the pilot return to the original screen and don´t accept any command. This state rests for 2 to 10 minutes and then accept commands again. This problem also ocurred during a comissioning procidure. By the way, the GPS data comes from a Garmin chart plotter .

I checked all the way of the power wire and allconnections and didn´t find any problem.

My boat equipment
SPX-10
P70
Drive Type 1
Rudder sensor
Chart Plotter Garmin

Thank you