Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Networking an a165 and gs165 MFD
01-08-19, 04:17 PM
Post: #2
RE: [CA11] Networking an a165 and gs165 MFD
Welcome to the Raymarine Forum Rom,

Q1. I have 2 chart plotters an a125 and a gs165. I want to be able to read Navionics charts for the same region on both, my understanding is that I only need one subscription with charts loaded on the SD card and both MFDs linked using a raynet to raynet cable. Is this correct?
A1. Indeed this is correct. In a nutshell, all system data and resources except for NTSC/PAL video (ex. CAM100/CAM50, DVD player, thermal camera w/NTSC/PAL video interface, etc.).

Q2. I seem to be having the issue with the charts display whereby the area I am in appears as a white missing puzzle.
A2. Please click here to view a FAQ addressing this subject.

Q3. I want to perform a software update but I am aware that updating one ( i think the gs165 ?) to lighthouse 3 will make it incompatible with the a125 ( which doesn't support lighthouse 3?). Should I therefore be looking to update both to: v19.03 ?
A3. Systems featuring an a/c/e-Series MFD cannot be updated with LightHouse 3 software.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Networking an a165 and gs165 MFD - Chuck - Raymarine - Moderator - 01-08-19 04:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)