Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dragonfly 5 Pro updates
01-29-19, 04:51 PM (This post was last modified: 01-29-19 04:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Dragonfly 5 Pro updates
I've had two third party chartplotters. Both had the ability to do the following 2 items. Any chance of an update including these features for the Dragonfly 5 Pro ? Not sure if this is even possible but thought I;d ask.
1- Create waypoints by entering the coordinates.
2- Be able to read GPS values in any of the 3 formats ... DMS, DMM and DD
Find all posts by this user
Quote this message in a reply
01-29-19, 05:12 PM
Post: #2
RE: [CA11] Dragonfly 5 Pro updates
Welcome to the Raymarine Forum fishmonger3,

Unfortunately, not future software updates are planned for the Dragonfly product line. That said, at least the first item within you list may be accomplished by simply creating a waypoint within the Chart application and then editing that waypoint's coordinate's. For those seeking to enter large numbers of waypoints into their Dragonfly, a computer based navigational planning application supporting GPX file format would typically be used to accomplish this end. One of the easiest to use such programs is GPS Utility. This program also supports the each of the coordinate formats which you have referenced. The GPX file produced by the navigational planning application may then be copied to a microSD memory card and then imported into the Dragonfly display's memory.

Please click here to view a FAQ addressing constraints for waypoints.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)