Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting Yamaha to axiom 9
05-04-19, 05:49 PM (This post was last modified: 05-06-19 04:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connecting Yamaha to axiom 9
Hello, I was hoping someone could quickly tell me what is needed to connect my 2003 Yamaha f115 to my axiom 9.

Thanks in advance
Find all posts by this user
Quote this message in a reply
05-06-19, 04:50 PM
Post: #2
RE: [CA11] Connecting Yamaha to axiom 9
Welcome to the Raymarine Forum Gnj5,

Please click here to view a FAQ addressing this subject. More information concerning how Raymarine's ECI-100 may be used to interface Yamaha engines to a Raymarine system may be found the Yamaha tab of the ECI-100 Engine Gateway Compatibility tab.

With the introduction of LightHouse 3 v3.9.46, Raymarine added a second means of interfacing Yamaha engines to Raymarine systems featuring MFDs running LightHouse 3 v3.9.46. The Yamaha app features are enabled (unlocked) when the following requirements are met:
• A compatible Yamaha Command Link or Command Link Pro network is connected to the MFD via a Yamaha NMEA 2000 gateway (6YG-8A2D0-00-00) or CL7 Gauge.
• Your MFD must be running LightHouse 3 version 3.9 or above

Details of this second method may be found within Chapter 13: Yamaha app of the LightHouse 3.9 Advanced Operation Instructions.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)