[CA11] Upgrade E120 questions

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Upgrade E120 questions

05-14-19, 09:27 AM

Post: #10

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Upgrade E120 questions

Wdeertz,

Each of Raymarine's IP marine cameras have been terminated with a male RJ45 plug. A weatherproof coupler is packed with these cameras. An appropriate length of marine grade CAT6 patch cable (RJ45 (M) plugs on each end) would be used to interface the coupler to a PoE injector. If interfacing the camera to the POE port of an Axiom XL MFD, then an appropriate length of RayNet (F) to RJ45 (M) Cable would be used to interface the coupler to one of the Axiom XL MFD's PoE ports.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Upgrade E120 questions - Wdeertz - 05-06-19, 10:53 AM

RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-07-19, 03:45 PM

RE: [CA11] Upgrade E120 questions - Wdeertz - 05-10-19, 10:24 AM

RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-10-19, 12:49 PM

RE: [CA11] Upgrade E120 questions - Wdeertz - 05-11-19, 04:28 PM

RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-13-19, 10:27 AM

RE: [CA11] Upgrade E120 questions - Wdeertz - 05-13-19, 08:13 PM

RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-14-19, 07:37 AM

RE: [CA11] Upgrade E120 questions - Wdeertz - 05-14-19, 09:00 AM

RE: [CA11] Upgrade E120 questions - Chuck - Raymarine - Moderator - 05-14-19 09:27 AM

User(s) browsing this thread: 1 Guest(s)