Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom 9 Chartplotter - Live Sonar has stopped working
06-13-19, 02:46 AM (This post was last modified: 07-04-19 12:12 AM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Axiom 9 Chartplotter - Live Sonar has stopped working
Hi,

I’ve had an Axiom 9 plotter on my yacht since November 2018 - the live sonar mapping has been working fine until yesterday.

Yesterday I connected the chartplotter to the internet for a software update. It has now got Lighthouse 3.9.46 and the live sonar rendering to the screen has stopped. It is still collecting the data. If I switch between detailed chart and fishing chart (where the live sonar is activated) the immediate history is displayed.

Have tried switching the system on/off and resetting the switches in the Depths option - no change.

Many Thanks
Find all posts by this user
Quote this message in a reply
07-04-19, 12:22 AM
Post: #2
RE: [TG11] Axiom 9 Chartplotter - Live Sonar has stopped working
Hello Mark44635,

I'm sorry for the delay replying, your question got assigned to me but I've been out of the office a lot recently with dealer training and so on. Apologies.

Do the SCL contours appear at close ranges or after you pan around the chart area?

We have seen some unusual behaviours after upgrading to 3.9 which are currently under investigation by our software engineers, and I think that this could be one of these. I can't see anything having been formally reported as a bug on this and I would expect that if all LH3.9 displays were affected we'd have been inundated with support requests, which hasn't happened so far. I would like to see whether a reset resolves the problem. To do so, back up all of your settings and data (in Home > My Data > Import/Export, Save Settings and Save Data) and then perform a Factory Reset in Home > Settings > This Display. Do make sure that you back everything up before doing a reset.

Whether this resolves the problem or not, please let me know.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)