[CA] [CA11] Quantum 2 loss of connection
|
06-23-19, 10:35 AM
(This post was last modified: 06-24-19 12:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Quantum 2 loss of connection
I have axiom 9, axiom 7 and a quantum 2 connected to a HS5 network switch. Had been working fine. Connected the mfd’s yesterday - went out and went to power up radar and got message no radar found - trying to connect. Checked the switch and all 3 green poet lights were in and flashing. After my cruise. Removed the displays from the helm. This morning, went down and connected the displays. Same result. So I decided to swap the network cables from the axiom 9 and 7. Powered system back up and radar works as before. The radar was originally setup with the axiom 9 directly. Does it make sense that a port change on the mfd matters on the HS5? Thats the only change. Radar is on port 5, axiom 9 on 4 and axiom 7 on 3. This works. When the 9 and 7 ports are seapoed it does not work. Anybideas?
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Quantum 2 loss of connection - schomakr - 06-23-19 10:35 AM
RE: [CA11] Quantum 2 loss of connection - Chuck - Raymarine - Moderator - 06-24-19, 12:48 PM
|
User(s) browsing this thread: 1 Guest(s)