Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] St4000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] St4000
07-09-19, 04:11 PM (This post was last modified: 07-25-19 07:54 AM by Derek - Raymarine - Moderator.)
Post: #1
dcneuro Offline
Junior Member
**
 		Posts: 29
Joined: Sep 2017
Reputation: 0
[DG11] St4000
My ST4000 continuously says no data or low batt and goes off course. Is there a logical reason why or is the unit just shot? My mechanic checked it and said that there was no wire corrosion causing the problem.

Thanks.
Find all posts by this user
Quote this message in a reply
07-25-19, 08:42 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] St4000
Hi dcneuro

The symptoms you describe suggest the ST4000 PCB is faulty and will need to be replaced.

This product is no longer supported by Raymarine, since spares are very difficult to come by.

We recommend it is replaced with an Evolution 100 system which can be connected to the same drive as the ST4000 operated.
Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication