Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD causing radio static
05-25-16, 11:52 AM
Post: #1
MFD causing radio static
When I turn on breaker for E125 MFD both VHF and 2 Meter radios get some static noise. When I power up the E125 the static noise gets even worse. When I hit the mic key on my VHF it stops the static on my 2 meter radio for a minute or so then it comes back on. Started having this problem when I added a second MFD. Any suggestions ?
I tried a power filter on both radios and it did not help. Tested breaker switch and it's fine. Running out of ideas.
Find all posts by this user
Quote this message in a reply
05-25-16, 12:06 PM
Post: #2
RE: MFD causing radio static
Welcome to the Raymarine Forum Defiance Sportfishing,

Please click here to view a thread addressing this subject. In this case, it would be recommended that ferrite bead RF chokes be installed as close as is permissible to the MFD Power/NMEA 0183/Video Input Cable's plug. Should this not resolve the problem, then it is recommended that the MFD and its Power/NMEA 0183/Video Input Cable be sent to latest available Raymarine product software updates to be bench tested/serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)