Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Possible to connect
08-12-19, 07:08 AM (This post was last modified: 08-16-19 07:13 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Possible to connect
Hi all,

Is it possible to connect the autopilot to the axiom 7 MFD via a conversion kit Seatalk to SeatalkNG.

there's already a seatakNG network, so I understood that it's not needed to connect the red wire, since it's already getting power from the seatalkNG which is connected to a switch and to a battery.
Find all posts by this user
Quote this message in a reply
08-23-19, 03:17 AM
Post: #2
RE: [LW11] Possible to connect
Dear marcelvdwart,

Thank you for your post.

You can connect the pilot via the ST1 to STng convertor. This will enable you to share waypoint and route data, you will not have the ability to control the pilot from the Axiom. If you are tracking to a waypoint you will need to engage the autopilot from the control head.

The part number is E22158 and please find more information here.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)