Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar cable connectors
09-10-19, 12:28 PM
Post: #2
RE: [CA11] Radar cable connectors
Welcome to the Raymarine Forum Rom,

Q1.) Does raymarine make replacement plugs to cut and remake the plug at the radar end? ( there is lot's of excess cable available)
A1. Negative. However, as indicated within the FAQ found here, the corroded RJ45 plug may be removed and replaced with a commonly available shielded RJ45 plug. It is recommended that Raymarine's R32142 RJ45 to RJ45 Waterproof Coupler be used to join the two cables.

Q2.) What would be the best way to offer a quick unplug at the base of the mast.
A2. Please click here to view a FAQ addressing this subject ... particularly the section dealing with sailboat masts.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Radar cable connectors - Rom - 09-03-19, 07:24 AM
RE: [CA11] Radar cable connectors - Chuck - Raymarine - Moderator - 09-10-19 12:28 PM
RE: [CA11] Radar cable connectors - Rom - 10-02-19, 08:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)