Raymarine forum / Raymarine Forums / Networking / System Integration v / [JB] [JB11] Fuel Tank View NMEA 2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] [JB11] Fuel Tank View NMEA 2000
05-23-20, 06:10 PM (This post was last modified: 05-28-20 09:21 PM by Jules - Raymarine - Moderator.)
Post: #1
ocgrant Offline
Junior Member
**
 		Posts: 14
Joined: Jul 2019
Reputation: 0
[JB11] Fuel Tank View NMEA 2000
I installed this and it is working but I only have 2 fuel tanks and tank 2 is showing no data. If I add tank 3 it has what is actually in tank 2. How do I correct this so I don't have to have 3 tanks on the display?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
05-28-20, 09:35 PM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: [JB11] Fuel Tank View NMEA 2000
Hello ocgrant,

The MFD can only display data that is being sent to it from a particular sensor instance, let's say you can call it a channel. Often instances are setup logically as 1 ... 2 ... 3 and so on. In fact with programming, in just about every case, the first instance is 0. You will find that when you set the first tank as instance 0 in the sensor setup it will show correctly on the MFD.

Hope this helps

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication