[CA] [CA11] ES 127 transducer

[becnme]

I recently replaced a B744V transducer that feeds an Es127 MFD. I had this transducer installed during a recent bottom job without checking the connections and when we went to hook it up found we had the wrong connector. The old transducer was a
31-668-2-02 and we installed a 31-669-1-01. Is it possible to cut and splice these cables? Any other suggestions without pulling the boat again?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum becnme,

Do not cut the transducer's cable. Airmar's 31-669-1-01 variant of the B744V was designed for use with Raymarine's CP370, CP300, DSM300, DSM30, DSM250 sounder modules and hsb/hsb2/SL Pathfinder Series Fishfinders. Transducers designed for use with these fishfinding products may be adapted for use with an ax7/cx7/e7D/eSx7 MFD by using the E66066 Transducer Adapter Cable.