[CA] [CA11] Display EGT via NEMA2000 on Axiom
|
11-22-19, 01:16 PM
(This post was last modified: 11-22-19 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Display EGT via NEMA2000 on Axiom
I see there is the ability to display engine boost pressure, but can’t find a corresponding Exhaust Gas Temp display.
Is it possible to display EGT on an Axiom 12 and what is the PGN? |
|||
11-22-19, 03:00 PM
(This post was last modified: 11-22-19 03:10 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Display EGT via NEMA2000 on Axiom
Welcome back to the Raymarine Forum dtfld,
Exhaust Gas Temperature is listed within the NMEA 2000 spec for PGN 130316 - Temperature, Extended Range. Unfortunately, Exhaust Gas Temperature is not among the current list of engine data items supported within the Dashboard application of LightHouse 3 software (v3.11.42 at the time of this response). A feature request will be logged to consider support for this engine data item within a future LightHouse 3 software update. Please click here more information concerning product and feature suggestions. |
|||
12-15-19, 01:17 PM
(This post was last modified: 12-16-19 11:35 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] Display EGT via NEMA2000 on Axiom
Does the i70s support it. I'm loooking to do electronic instruments...third party products can do this, seems like a simple upgrade.
|
|||
12-16-19, 11:39 AM
Post: #4
|
|||
|
|||
RE: [CA11] Display EGT via NEMA2000 on Axiom
dtfeld,
Likewise, Exhaust Gas Temperature is not among the current list of engine data items supported i70/i70S software (v3.1.6 at the time of this response). A feature request will be logged to consider support for this engine data item within a future i70/i70S software update. Please refer to the previously referenced FAQ addressing product software feature requests. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)