European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[TG] Split Transducer Signal Furuno and Axiom
/
[TG] Split Transducer Signal Furuno and Axiom
|
[TG] Split Transducer Signal Furuno and Axiom
|
|
01-13-20, 08:08 PM
(This post was last modified: 01-14-20 10:25 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
Split Transducer Signal Furuno and Axiom
We have a Furuno FCV-295 with Airmar R109C-LH transducer. Also have an Axiom 12. Is there any possibility to split the transducer signal for both the Furuno and Axiom?
|
|||
|
|
01-14-20, 10:31 PM
Post: #2
|
|||
|
|||
|
RE: Split Transducer Signal Furuno and Axiom
Hello XandeGuedes,
No, don't try to do this. It won't work and you will destroy the sounders by each putting something over 1000Vp-p into the other's receiver when it transmits. If there were an industry-standard language for sharing sounder data (analogous to NMEA2000 but for high-bandwidth graphical data) then that might allow the sharing of the sounder image, but at this stage there is no such protocol. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)