[CA] [CA11] AP Selection

[Gamori]

26’ Carver Santa Cruz 1986
8’ Beam
260 Merc
5400# + gear
Displacement 5,000#
2 station steering

Adding a Merc Pro Kicker 15hp

I’d like to update the AP to run the kicker via EZ rod solo, while using the main to steer as well. (Uncle Norm’s Orca fin??)

I was told there was a conversion done previously and it no longer needed the res tank that should be mounted on the transom. Please forgive my ignorance, I’m used to a 14’ john boat for crappie fishing not trolling a Great Lake for salmon.

Old installed AP setup in attached pix.

Thanks in advance, Gam.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Gamori,

As near as I can ascertain from the photo of the steering ram's cable, it appears to be a Teleflex 125-8EM (HC5328). The cubic capacity of this steering ram is 21.25 cu. in. (345 cc). This would typically require a Type 2 Hydraulic Pump. Should the currently installed hydraulic pump be operational, then it may be used with a T70162 EV-400 Power (included EV-1 CCU, ACU-400, p70RS control head, and Evolution Cabling Kit).

[Gamori]

Thank you, sir. -Gam

[Chuck - Raymarine - Moderator]

You're welcome.