Second display to pair with Axiom Pro RVX
|
05-24-20, 11:49 PM
Post: #1
|
|||
|
|||
Second display to pair with Axiom Pro RVX
Good afternoon team,
Just wondering which MFD's pair well with the Axiom Pro 12rvx? i wish to compliment my current 12inch screen with a 9 or 7 inch screen. Can you pair the RVX with the lower level Axiom or do you have to pair them with a second RVX? I have the RV-100 and TM265 transducers connected to the 12. Currently i have the 12 connected to seatalk backbone to network the external buzzer, i40 deep display and RS150 antenna. Any feedback would be greatly appreciated. Thanks Ryan |
|||
05-28-20, 03:23 PM
Post: #2
|
|||
|
|||
RE: Second display to pair with Axiom Pro RVX
Hello Ryan C2400,
The Axiom 12 Pro RVX will pair with any of the Axiom displays. This includes Axiom/Axiom Pro and Axiom XL. Chris, |
|||
05-29-20, 07:12 AM
Post: #3
|
|||
|
|||
RE: Second display to pair with Axiom Pro RVX
Any Axiom display would pair well. You would not need to get another sonar-enabled model, as the first unit will share all sonar data with a 2nd (or 3rd, 4th etc) via Raynet. Just make sure they are connected via Raynet (ethernet), as sonar and radar data is not carried over the NMEA200 network. For just 2 devices, you can connect them directly with a Raynet to Raynet cable. If you are going to add more Ethernet-connected devices (Radar, RMK10, cameras, more MFDs, etc) then you'll wind up with an HS5 switch in the mix as well.
|
|||
06-01-20, 10:59 PM
Post: #4
|
|||
|
|||
RE: Second display to pair with Axiom Pro RVX
@brk
Absolutely correct and well noted. Happy boating and kind regards Jules |
|||
06-02-20, 05:13 AM
Post: #5
|
|||
|
|||
RE: Second display to pair with Axiom Pro RVX
Thank you for your replies. Greatly appreciate your feedback.
|
|||
06-04-20, 02:59 PM
Post: #6
|
|||
|
|||
RE: Second display to pair with Axiom Pro RVX
Your welcome,
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)