[TG11] Axiom Pro 12 - real vision issue

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Axiom Pro 12 - real vision issue

07-11-18, 07:43 AM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)

Post: #1

West32 Offline

Junior Member

Posts: 38
Joined: Aug 2017
Reputation: 0

[TG11] Axiom Pro 12 - real vision issue

Wondering what I have wrong with my Real vision 3d setup.

I have the dual transducers mounted under the boat on each side of the keel.

When I go to the 3d screen, the bottom is shown, but is only a thin strip down the middle. This is the case whether I am in my slip or in 80 fow.

The attachment is a capture from your website. Mine only shows out the 25ft on each side of the boat.

I'll try to get a capture next time I'm out.

Any idea if I have a setting wrong?

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 8.1 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
P70R
Smart Remote

https://photos.app.goo.gl/UKDm91zlSwlPhCQ12

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Axiom Pro 12 - real vision issue - West32 - 07-11-18 07:43 AM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-18-18, 10:07 PM

RE: [TG11] Axiom Pro 12 - real vision issue - West32 - 07-23-18, 01:26 PM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-25-18, 10:46 PM

RE: [TG11] Axiom Pro 12 - real vision issue - West32 - 07-26-18, 04:04 PM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-27-18, 12:01 AM

User(s) browsing this thread: 2 Guest(s)