Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
01-10-19, 04:38 AM (This post was last modified: 01-10-19 04:41 AM by Louise - Raymarine - Moderator.)
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
Dear guavaberrytree,

The ACU300 does not have a 12v power supply for a motor, the ACU300 is for solenoid drive units only. What drive unit do you have as it seems the ACU300 could be the incorrect auto-pilot for your steering system.

Please find the table below for referencing suitable auto-pilots for your drive type.

Many Thanks
Louise


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump - Louise - Raymarine - Moderator - 01-10-19 04:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication