Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
01-14-19, 06:36 AM
Post: #4
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
Dear guavaberrytree,

Thank you for the response.

I have just reviewed the manual for the E12172, the image has not been updated to reflect the ACU300. Where it states motor in the image, this should say solenoid. I will get this amended.

Take the positives of Solenoid cable A and Solenoid cable B to the Solenoid A and B ports on the ACU300, then the negatives need to run back to the negative port on the ACU300.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump - Louise - Raymarine - Moderator - 01-14-19 06:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication