Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
01-25-19, 02:24 PM
Post: #9
guavaberrytree Offline
Junior Member
**
 		Posts: 6
Joined: Jan 2019
Reputation: 0
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
Hi Derek,

I have connected a relay to the "bypass" connection of the ACU 300.
When I press "auto" I get the right voltage but after about 10 seconds, the voltage drops to 0V. I tried without anything connected to the "bypass" connection, I tried the 12V and the 24V positions, no difference. How can I get a constant voltage on this "bypass" connection?

Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump - guavaberrytree - 01-25-19 02:24 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication