Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
01-28-19, 07:43 AM
Post: #10
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
Hi guavaberrytree

The outcome you advise is expected - with nothing connected across the output terminals, the ACU identifies that there is nothing connected and so only supplies output for a short period of time, it then shuts down.

We have had reports that testing with a 12v Light bulb will be enough load to enable the output to remain functional.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump - Derek - Raymarine - Moderator - 01-28-19 07:43 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication