The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
04-19-19, 03:27 PM (This post was last modified: 04-23-19 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2019
Reputation: 0
[CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
I have a 120 Raymarine GPS connected to a 2002 Raymarine system including a RL70c plus hsb2 chartplotter, 150 course computer, fluxgate compass, RC 530 radar display, and Raymarine auto pilot. I want to remove the 120 GPS and replace it with a NMEA0183 GPS receiver. Any help with a wiring diagram or suggestions would be helpful.

Thanks in advance,

George Miller
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver - [email protected] - 04-19-19 03:27 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication