Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
04-23-19, 10:14 AM (This post was last modified: 04-23-19 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver
Welcome to the Raymarine Forum George,

When interfacing a third party GPS sensor supporting 4800 BAUD NMEA 0183 v2.1 or greater communications protocol to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display,
- connect the NMEA 0183 IN1+ (green) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT+ lead
- connect the NMEA 0183 IN1- (blue) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT- lead
- connect the NMEA 0183 GPS sensor's power and ground leads to a switched power circuit and to ground as directed by the GPS sensor's manufacturer.

Alternatively, please click here to view a FAQ addressing how a Raystar 150 GPS Sensor may be interfaced to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver - Chuck - Raymarine - Moderator - 04-23-19 10:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication