Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] copying routes/waypoints from Axion Pro to a97

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] copying routes/waypoints from Axion Pro to a97
05-09-19, 04:22 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] copying routes/waypoints from Axion Pro to a97
Welcome to the Raymarine Forum morowsky,

If running LightHouse 3 v3.8.105 in your MFD and LightHouse II v19.06 in the a-Series MFD, then it task should be as simple as exporting the data from your MFD to a microSD memory card, placing that microSD memory card into the a-Series MFD, and then commanding the a-Series MFD to import the waypoints and routes stored on the microSD memory card. If the Axiom Pro MFD is running LightHouse 3 v3.9.46, then you will want to verify that none of the waypoint names or route names longer than 16 characters. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] copying routes/waypoints from Axion Pro to a97 - Chuck - Raymarine - Moderator - 05-09-19 04:22 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication