[TG] [TG11] Bermuda Data Sources Screen Not Reporting Some Values

[Dan_Y]

I’m having a very minor issue on my Axiom9/Bermuda with the Data Sources not reporting some data values. The overall system operates correctly, but the Data Sources screen is not reporting all data for Wind and Time/Date and may point to other issues based on the error messages being displayed.

Wind1.jpg shows the wind speed is missing “-.-“, however, Buffer_I60_Wind_Instrument.jpg shows all data fields are being reported correctly. Time-Date.jpg shows the time/date values missing – but they are reported elsewhere on the MFD as expected.

When any of the data items on the Data Sources screen are first selected, the error message similar to that shown on “Wind_4038.jpg”appears. After acknowledging and refreshing, the wind values, sans the windspeed, are displayed as in “Wind1.jpg”. At a later time, when selecting the Wind data source again, another message was shown, captured in “Wind_1850.jpg”. Again, after acknowledging and refreshing, I see the Wind data, sans the windspeed. Not sure why the Wind data source would even care about either ST-STng converters.

Referring to my system diagram, I typically leave all data sources in “auto select” with the exception of the STW and Depth, which are ST60+ data masters and brought onto the STng network via the converter s/n 1004038. Manual selection of Depth and STW appear to speed up finding those data behind the converter. I use STW and Depth overlays on the Chart app. When using “Auto” data source selection, I would occasionally see “-.-“ for STW for a several seconds before values are populated upon selection the Chart App. I have not seen “-.-“ when using the Manual data source selection for the STW and Depth data sources. But on the Data Sources screen, the manual source selection give interesting error messages for Depth and STW, that after acknowledging and refreshing, the correct SYW and Depth data values are shown. Refer to Depth_1850.jpg and STW.jpg. Both data come through the ST-STng s/n 1004038.

Thanks
Dan