The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Oceanic Systems fuel tank sensor calibration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Oceanic Systems fuel tank sensor calibration
11-21-19, 05:27 PM (This post was last modified: 11-22-19 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
DLERMF Offline
Junior Member
**
 		Posts: 1
Joined: Nov 2019
Reputation: 0
[CA11] Oceanic Systems fuel tank sensor calibration
My trawler has a pair of 100 US gallon diesel fuel tanks. The port tank has been emptied, inspection ports installed and the tank cleaned. I plan to install the Oceanic Systems submersible hydrostatic sensor (Part 4652) and tank level adaptor (Part 4291).
A Raymarine Axiom Pro MFD was installed several months ago. I plan to repeat the process on the starboard tank after completing sensor installation and refueling the port tank. I would prefer to add no more than 25 gallons of diesel fuel to the port tank because of trim concerns with an empty starboard tank.
Question:
Is it possible to have an accurate tank calibration with 25 gallons of fuel?
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Oceanic Systems fuel tank sensor calibration - DLERMF - 11-21-19 05:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication