European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Ferrite Supression required for new ACU-200?
|
|
12-13-16, 02:01 PM
(This post was last modified: 12-13-16 04:37 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: Ferrite Supression required for new ACU-200?
Suppression ferrites
Raymarine cables may be fitted with suppression ferrites. These are important for correct EMC performance. Should a ferrite be removed, then the RF emissions produced by the product may cause RF interference with other products (ex. VHF radios, stereo receivers, etc.). If a ferrite has to be removed for any purpose (e.g. installation or maintenance), it must be replaced in the original position before the product is used. Should a ferrite not be packaged with the product, then it should not be necessary to install a ferrite on the cable which will be powering the product. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Ferrite Supression required for new ACU-200? - Farley - 12-10-16, 12:13 PM
RE: Ferrite Supression required for new ACU-200? - Chuck - Raymarine - Moderator - 12-13-16 02:01 PM
|
User(s) browsing this thread: 1 Guest(s)