The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / E Classic series Seatalk 2 port

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E Classic series Seatalk 2 port
03-14-16, 09:14 AM
Post: #1
MS Aeromarine Offline
Junior Member
**
 		Posts: 15
Joined: Feb 2016
Reputation: 0
E Classic series Seatalk 2 port
Hello,

We have a costumer with an E80 Multifunction display and we need to know if the seatalk 2 port is working, where can we find the pinout of this port? I found the NMEA 0183 and Seatalk pinout in the instalation manual, but Seatalk 2 is missed!

A few more cuestions:

Is Seatalk 2 fully compatible with Seatalk NG?

Is necessary to power the Seatalk 2 port from the network in order it to work?

Can GPS, autopilot, sounder and anemometer be connected to de E80 throught the Seatalk 2 port?

Thanks in advance,

Martin Sivolella
Aeromarine S.A.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E Classic series Seatalk 2 port - MS Aeromarine - 03-14-16 09:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication