The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] iTC-5 Compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] iTC-5 Compatibility
07-17-18, 02:23 PM (This post was last modified: 07-17-18 02:52 PM by Chuck - Raymarine - Moderator.)
Post: #1
taylort100 Offline
Junior Member
**
 		Posts: 4
Joined: Sep 2016
Reputation: 0
[CA11] iTC-5 Compatibility
I have an e95, AIS650, i70, i50, and i60. I had purchased an iTC-5 to link my earlier speed through water / temperature sensor to the network. I checked the speed/temp with the older display just prior to the switch to the iTC-5. But, after conversion the speed through the water and temperature data is not shown by the i70.
The i70 sees that the iTC-5 is on the network. I have it connected via the blue ended cable. I have the other blue socket filled with the blue termination plug.
Some people have suggested that the iTC-5 is not universally compatible with all older Raymarine sensors - not sure which mine is ST50 or ST60. Any suggestions for diagnosing this?
Tom, Catalina 380
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] iTC-5 Compatibility - taylort100 - 07-17-18 02:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication