Second display to pair with Axiom Pro RVX

[Ryan C2400]

Good afternoon team,

Just wondering which MFD's pair well with the Axiom Pro 12rvx? i wish to compliment my current 12inch screen with a 9 or 7 inch screen. Can you pair the RVX with the lower level Axiom or do you have to pair them with a second RVX? I have the RV-100 and TM265 transducers connected to the 12.

Currently i have the 12 connected to seatalk backbone to network the external buzzer, i40 deep display and RS150 antenna.

Any feedback would be greatly appreciated.

Thanks
Ryan

[Chris - Raymarine - Moderator]

Hello Ryan C2400,

The Axiom 12 Pro RVX will pair with any of the Axiom displays. This includes Axiom/Axiom Pro and Axiom XL.

Chris,

[brk]

Any Axiom display would pair well. You would not need to get another sonar-enabled model, as the first unit will share all sonar data with a 2nd (or 3rd, 4th etc) via Raynet. Just make sure they are connected via Raynet (ethernet), as sonar and radar data is not carried over the NMEA200 network. For just 2 devices, you can connect them directly with a Raynet to Raynet cable. If you are going to add more Ethernet-connected devices (Radar, RMK10, cameras, more MFDs, etc) then you'll wind up with an HS5 switch in the mix as well.

[Jules - Raymarine - Moderator]

@brk

Absolutely correct and well noted.

Happy boating and kind regards
Jules

[Ryan C2400]

Thank you for your replies. Greatly appreciate your feedback.

[Chris - Raymarine - Moderator]

Your welcome,