Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro 12 system reboot
01-28-20, 02:29 PM (This post was last modified: 01-28-20 02:37 PM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA11] Axiom Pro 12 system reboot
Hello Chuck, please find attached information you need.


Attached File(s)
.json  Diagnóstico_Sion.json (Size: 8.47 KB / Downloads: 22)
Find all posts by this user
Quote this message in a reply
02-13-20, 01:13 PM
Post: #12
RE: [CA11] Axiom Pro 12 system reboot
Miguel,

Initial feedback from the engineering team is that the system is stumbling within the Navionics software libraries. Raymarine's engineering team is reaching out to Navionics accordingly. Such problems would typically result in updates to the Navionics software libraries included within Raymarine LightHouse and third party chartplotter software updates. This may be verified by simply removing the chart card from the MFD and performing the same test ... or select a different cartography type (LightHouse or C-Map ... no chart card required ... will use the base maps) for use within the Chart application pane.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)