[LW] [LW11] Connecting AIS700 with Element HV 9
|
05-07-20, 10:40 AM
Post: #8
|
|||
|
|||
RE: [LW11] Connecting AIS700 with Element HV 9
Hi Harald
The AIS traffic can be monitored by connecting PRO-AIS2 to the USB port of the AIS700 and then you can see the AIS traffic incoming, assuming that this is all OK then the odd thing is that you cannot see the controls in the set up menu to turn the AIS layer on - as suggested by Louise in the earlier post. My suggestion would be to carry our a hard reset on the Element unit, this is described in the attachment, then check again to identify if the AIS control are available in the chart app. regards Derek |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] Connecting AIS700 with Element HV 9 - Harald.pedersen70@gmail.com - 03-25-20, 08:13 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Louise - Raymarine - Moderator - 03-27-20, 11:34 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Harald.pedersen70@gmail.com - 03-30-20, 02:52 PM
RE: [LW11] Connecting AIS700 with Element HV 9 - Louise - Raymarine - Moderator - 03-31-20, 05:54 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Harald.pedersen70@gmail.com - 04-08-20, 12:54 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Louise - Raymarine - Moderator - 04-17-20, 09:05 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Harald.pedersen70@gmail.com - 04-28-20, 05:38 AM
RE: [LW11] Connecting AIS700 with Element HV 9 - Derek - Raymarine - Moderator - 05-07-20 10:40 AM
|
User(s) browsing this thread: 1 Guest(s)