Raymarine forum / Raymarine Forums / Autopilots v / [LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
01-15-19, 10:15 AM
Post: #6
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump
Hi guavaberrytree

Thank you for your feedback

The motor supply is direct from distribution board where it can be correctly fused or protected by a circuit breaker. The supply can be switched by a relay so that the pump only runs when AUTO is selected, the relay can be triggered by the BYPASS connection on the ACU300.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Connecting the constant running hydraulic pump E12172 to the ACU-300 pump - Derek - Raymarine - Moderator - 01-15-19 10:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication